TOSHIBA TECRA A10-1CC Laptop Keyboard, TECRA A10-1CC keyboards
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A10-1CC
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A10-1CC
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A10-1CC
![]() Click for more pictures |
||
|
||
TOSHIBA TECRA A10-1CC keyboards tags: Tecra M10-S10 , Satellite A5 laptop keyboard , Satellite A5 laptop keyboard , Satellite P20 , Satellite P20 , Equium M40 laptop keyboard , Satellite S1130 laptop keyboard , Satellite 2415 , TOSHIBA Satellite A5 , Tecra M10-S34 laptop keyboard , Qosmio G35. laptop keyboard , Qosmio G30 , Satellite P20 , Satellite 2100. laptop keyboard , Satellite A115 , Satellite A3 , Satellite A6 laptop keyboard , Satellite M4 laptop keyboard , Satellite A115 laptop keyboard , Satellite A35 , Satellite A115 laptop keyboard , TOSHIBA Satellite A120 , Qosmio G35. , Satellite 2000 , Equium A60 , TOSHIBA Equium A80 laptop keyboard , Satellite P35 laptop keyboard , Satellite P25
Our keyboards are original from the keyboard manufacturer, We provide 100% genuine and brand new keyboard to replace your TOSHIBA TECRA A10-1CC keyboard. We back each purchase with a 100% Satisfaction Guarantee, so buy with confidence.
Your attention please:
Please firstly compare the picture with your TOSHIBA TECRA A10-1CC keyboard before you place an order, especially the ribbon cable (position, length and width). Make sure that the model of laptop and part number of TECRA A10-1CC keyboard is the right one you need as well as the layout version. If you are still not sure after a comparation, or want to know more about the TOSHIBA TECRA A10-1CC laptop keyboard, please contact us.
TOSHIBA TECRA A10-1CC notebook keyboard installation notice:
- To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the laptop computer.
- The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Exercise care when removing and handling the TECRA A10-1CC keyboard.
- Before securing the latch on the system board connector, ensure that the TOSHIBA TECRA A10-1CC laptop keyboard connector is seated and the tabs on the connector are properly aligned with the slots on the system board connector. Failure to align the tabs could result in a malfunction of the laptop or damage to the cable and/or the cable connector.





















